Orchard Plant
Irrigation system for an orchard made with IrriPro
On land with gentle slopes of 1.5% and a surface area of more than 30 hectares, a drip system was designed and built with 150,000 devices of 2 litres/hour and spacing of 2.5 metres. Driplines are placed every 2.5 meters. The plant is managed in 6 shifts with 4 sectors powered for each shift which require a flow rate of 36 cubic meters/hour at a pressure of 2.5 bar.
The Project
The project was developed in collaboration with TARANTINI GIUNTI Srl. Below are some results of the hydraulic simulation as the diameter of the dripline varies:
Below are some images of the installation carried out by TARANTINI GIUNTI Srl
Project made with IrriPro
This project was created thanks to IrriPro, the design software developed by IRRIWORKS
