Impianto per bambuseto

Impianto per bambuseto realizzato con IrriPro

Impianto per Bambuseto

Impianto di irrigazione per un bambuseto in Piemonte

The plant near Ivrea (Piedmont) has an area of ​​15 hectares and irrigates a bamboo plantation of 18,000 plants with a planting space of 2.8 x 2.8 m, divided into 6 shifts of 2.5 ha each. Based on the system request, the characteristic of the necessary pump was calculated, i.e. with a flow rate of 8.33 litres/second and a head of 3.8 bar.

Il Progetto

The system is fed by a reservoir. Below is the starting document and the result of the hydraulic simulation for one shift:

For the quality of the water (contains sand, vegetation and suspended material) a primary filtration has been provided consisting of a double chamber sand filter and a mesh sector filtration.

For the altimetric trend of the main pipeline, vents and drains were inserted.

For the irrigation of the bamboo, a dripline was chosen with self-compensating emitters placed at 75 mm with a flow rate of 2 litres/hour.

immagine prodotto irripro

Progetto realizzato con IrriPro

This project was created thanks to IrriPro, the design software developed by IRRIWORKS

BUY