User online

We have 1159 guests and no members online


Remember Me

Top Panel
  • IrriPro, The true way to design
  • Immediate to use and clear in the responses
  • IrriPro designs, others can only draw
  • Managing water is managing life
  • English (UK)
  • Italian (IT)

Multilevel Ryadh Metro Station

The project concerns the irrigation system for green areas located at different altitudes in the Ryadh metro station (Qasr Al Hokm Downtown) and in particular:
  • the green areas and the palm trees placed immediately outside the station and at a level equal to the street level
  • the flowerbeds placed on terraces that go down together with the stairs between the zero and the approximately -5 m
  • the internal garden in the lower floor of the underground station at an altitude of about -30 m

The first two areas are supplied by two pumping systems placed at different depths where water treatment systems are installed. A series of hydraulic checks were carried out to assess the achievement of acceptable levels of uniformity, efficiency and quality of the irrigation service.

For the outdoor area there is a drop and rain system (with pop-up) supplied in a single shift, and equipped with pressure reducers in order to protect the system parts with lower nominal pressures. For the recommended pump, the operating point and the acceptability of the obtained efficiency have been identified. The consultancy carefully assessed the sizes and nominal characteristics of the pipes for the pressures and load losses involved. Particular attention has been paid to the wide central flowerbed irrigated with a dense network of dripping laterals in sub-irrigation.


For the internal garden at an altitude - 30 m, an irrigation system has been planned divided into two distinct shifts:
  • 1st round at the service of vertical gardens and pots with palm trees (with pop-up and drip system)
  • 2nd round at the service of drip irrigated flowerbeds.
Several parts are equipped with pressure reducers based on the operating pressure and the nominal operating conditions of the devices.
Several supply scenarios were evaluated from the pump at the lower levels, to define a collateral junction with 3 ascents towards the garden level in order to obtain a functional distribution and a layout of the pipes with minimum impact for the crossing of the structure and intermediate floors.
Also in this case the operating point and the acceptability of the pump efficiency have been calculated.


The solution for any need

IrriPro softwareIrriPro is available with FREEWARE license for small systems and with basic features, with fully featured for limited time or with never ending LIFETIME licenses.


IrriPro has a CAD-style user friendly interface, designed to be used by engineers, agronomists and other technicians. They have all the analisys tool needed to estimate the consequences of any design choice and to represent the trend of any physical parameter.


The DB is not a list of passive elements, but a way to make the most of the software using existing material on the market.


The irrigation software IrriPro is the only tool that optimizes the use of water and improves the distribution uniformity, increasing the system efficiency and ensuring the correct distribution of water and fertilizers. Moreover IrriPro reduces the system realization costs, improving quantity and quality of agricultural production.