# Sample projects

**Measurement system set on SI**

Progetto | Descrizione | Ver. | |

1 | Design (proposed as example 1 of the tutorial) of a single sector without cartographic support in an area of about 0,34 [Ha] (0,84 Acres) supplied by source with a pressure of 1,38 [bar] (20 [PSI]) and makes of approximately 2244 online emitters with QN 4 [l/h]. The system is placed on a surface with a slope of 3% with emitters spacing either of 1.0 [m] (3,28ft) and between rows of 1.5 [m] (4,92ft). | 3.7x | |

2 | Design (proposed as example 2 of the tutorial) of #6 sectors over an area of about 6,3 [Ha] (15,56 Acres) supplied by source with a fixed discharge of 16 [mc/h] and makes of approximately The | 3.7x | |

3 | Design (proposed as example 3 WITHOUT DISCRETIZATION of the tutorial) of one sector over an area of about 3.6 [Ha] (8,9 Acres) supplied by source with a pressure of 1.3 [bar] (18,85 [PSI]) and makes of approximately 12,000 online emitters of QN 3.2 [l/h]. The system is built on a sloping surface (average slope of 1%) with emitters spacing either of 1,5 [m] (4,9 ft) and rows of 2 [m] (6,5 ft). The terrain model was derived using a cartography with scale of 1:10,000 and contour lines digitized manually. | 3.7x | |

4 | Design (proposed as example 3 WITH DISCRETIZATION of the tutorial) has the same characteristics and results of the previous project but achieved using the procedure of discretization. Due to discretization you can deal large projects without engaging too much the power of your PC. Suggested for large systems and for PC underperforming.. | 3.7x | |

5 | Design (proposed as example 1 of the tutorial) a | 3.7x | |

6 | Design (proposed as example of the tutorial) of | 3.7x |